FAN COIL MAINTENANCE TORONTO
INCREASE LIFESPAN
Imrove Air Quality
Our team of HVAC technicians will help you maintain your fan coil as per the manufacturer guidelines. Our team provides cleaning and maintenance for condominium heat pumps. Our team will clean the grease, dirt and other pollutants from the motor and ducts. We will conduct an inspection on the heat pump and check the process of the blower motor to test for any abnormalities.
How to maintain fan coil units
Fan coil units have basically three major components to check at regular service intervals: the motor, the filter, and the coil itself. First of all, be aware that every fan coil unit has its own unique operating environment, which may dictate a unique maintenance schedule. A formal schedule of regular maintenance and an individual unit log should be established and maintained to extract the maximum performance and service life from each unit
Direct Drive Motor /Blower Maintenance
The type of fan operation is determined by the control components and their method of wiring, and may vary from unit to unit. Refer to the wiring diagram that’s attached to each unit for that unit’s operating characteristics.
Coil Maintenance Coils
On most fan coil units can be cleaned by removing the motor/blower assemblies and brushing the entire air face between fins with a stiff brush. Brushing should be followed by a thorough vacuuming. If a compressed air source is available, the coil may also be cleaned by blowing air through the coil fins from the exiting air face. Keep in mind that units with the proper type of air filters, replaced regularly, will require less frequent coil cleaning. Which brings us to filter maintenance.
Filter Maintenance
On units with throwaway filters, the time interval between each replacement should be established based on regular inspection of the filter, and should be recorded in the log for each unit. Filters should be the same type and size as those furnished from or recommended by the factory. Pleated media or extended surface filters should generally not be used, because the high air pressure drops encountered with these types of filters is often not compatible with fan coil units.
Drain Maintenance
Check the drain at the beginning of each cooling season to ensure that the drain trap and line are clear. If they’re clogged, clear any debris so that condensate will flow easily.
Electrical Wiring and Controls
The electrical operation of each unit is determined by the components and wiring of the unit, and may vary from unit to unit. Consult the wiring diagram attached to the unit for the type and number of controls provided on each unit.
WE CAN HELP WITH
Cleaning
Installation
Inspection
Estimation
CONTACT US
Reach out to our team to discuss your project requirements in greater detail.